Command Introduction

This article will continue to be updated.

M500

Save current settings.

M501

Read current settings

M502

Restore default settings

M503

Serial output save settings

M2100

The laser mode is converted to print mode.

M2105

Turn on the Y axis acceleration function and set the Y axis acceleration. You can execute M500 to save the setting.

This is equal to the menu option, Main menu -> Prepare -> Machine Settings -> Y-outer-Acc

Only valid for the outer ring of the print model.

USAGE: M2015 S500 or M2105

'500' is the value you want to set. If you don't set it, just execute M2105, and you'll use the values set by the menu. Do not set this value too low.

M2106

Turn off the Y axis acceleration distance function and use the default Y axis acceleration. Turn off M2105.

M2200

Set to laser engraving mode.

M2201

The Z axis returns zero and moves the Z axis to the height of 80MM, and then automatically turns on the laser.

M2202

Turn off the laser

M2203

Set the focal length.

USAGE: M2203 D94

94 is the focal length. If you execute M2203, the focus defaults to 93., the smaller the focus the better.

M2204

Set the thickness of the carved object.

USAGE: M2204 H10

10 is the thickness of the object.If you perform M2204, the thickness of the object defaults to 0.

M2205

Set base points for engraving.

M2206

This command is the starting role. If you open a NC file exported by Dragenfly, you'll find the command at the top.